LL-PDL-DIM · Paddle series
Paddle LED Dimmer Switch
Single-pole or 3-way, 150 W LED load, slider trim for the low end.
All prices are in US dollars (USD). Sales tax calculated at checkout.
Works with
- Every dimmable fixture and bulb in this catalog
- Standard single-gang wall boxes with a neutral
Before you order
- 30-day returns from delivery. Uninstalled fixtures are refunded in full, with no restocking fee, and we pay return shipping.
- Installed fixtures cannot be returned for change of mind, but carry the 3-year warranty against defect. Anything faulty on arrival is replaced or refunded.
- Refunds are issued to the original payment method within 5 to 7 business days.
- This is a one-time purchase. There is no subscription, no membership and no recurring charge.
- Your statement will show LANDRO LIGHTING.
About this fixture
A paddle dimmer made for LED loads. Tap to turn on and off, slide to set the level, and it comes back on at the level it was left at.
A trim adjustment behind the paddle sets the lowest level, which is what stops a particular bulb from flickering or dropping out at the bottom of the range.
Rated for 150 W of LED, roughly 15 of our A19 bulbs. Requires a neutral wire in the wall box; most boxes wired since the 1980s have one, but check before ordering.
Materials
- Polycarbonate paddle and plate, white
In the box
- Dimmer
- Decorator wallplate
- Wire connectors and screws
Specification
| Load | 150 W LED, 600 W incandescent |
|---|---|
| Wiring | Single pole or 3-way |
| Neutral | Required |
| Dimming type | Trailing edge, with low-end trim |
| Wallplate | Standard decorator opening, plate included |
| Voltage | 120 V AC |
| Shipping weight | 0.4 lb |
| Warranty | 3 years |
Hardwired fixtures should be installed with the power off at the breaker and in line with local electrical codes. If in doubt, use a licensed electrician.
